3Com 5500G-EI Command Reference Guide - Page 71

Ethernet Port Link Aggregation Commands 71 Description Use the debugging lacp state command to enable LACP state machines debugging on a designated port or ports. Use the undo debugging lacp state command to disable LACP state machines debugging on a designated port or ports. Example To enable all LACP state machines debugging. debugging lacp state all display link-aggregation Syntax summary display link-aggregation summary View Any view Parameter None Description Use the display link-aggregation summary command to view summary information of all aggregation groups, including actor system ID, aggregation group ID, aggregate group type, partner system ID, number of selected ports, number of standby ports, load sharing type and master port number. Example To display summary information of all aggregation information, enter the following: display link-aggregation summary Aggregation Group Type: D -- Dynamic, S -- Static, M -- Manual Loadsharing Type: Shar - Loadsharing, NonS - Non-Loadsharing Actor ID: 0x8000, 00e0-fcff-ff04 AL AL Partner ID Select Standby Share Master ID Type Ports Ports Type Port 1 D 0x8000,00e0-fcff-ff01 1 0 NonS Ethernet1/0/1 10 M none 1 0 NonS Ethernet1/0/2 20 S 0x8000,00e0-fcff-ff01 1 0 NonS Ethernet1/0/3 display link-aggregation Syntax verbose display link-aggregation verbose [ agg_id ] View Any view Parameter agg_id: Aggregation group ID, which must be a valid existing ID, in the range of 1 to 464.