3Com 5500G-EI Command Reference Guide - Page 380

380 CHAPTER 11: USING AAA AND RADIUS COMMANDS To set the authentication/authorization key of the RADIUS scheme to "hello", enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]radius scheme 3Com [SW5500-radius-3Com]key authentication hello Example 2: To set the accounting packet key of the RADIUS scheme to "ok", enter the following: [SW5500-radius-3Com]key accounting ok local-server Syntax local-server nas-ip ip-address key password undo local-server nas-ip ip-address View System View Parameter nas-ip ip-address: set NAS-IP address of access server. ip-address is expressed in the format of dotted decimal. By default, there is a local server with the NAS-IP address of 127.0.0.1. key password: Set password of logon user. password is a character string containing up to 16 characters. Description Use the local-server command to configure the parameters of local RADIUS authentication server. Use the undo local-server command to cancel a local RADIUS authentication server. RADIUS service, which adopts authentication/authorization/accounting servers to manage users, is widely used in the Switch 5500G-EI. Besides, local authentication/authorization service is also used in these products and it is called local RADIUS authentication server function, that is, realize basic RADIUS function on the Switch. When using local RADIUS authentication server function, remember the number of the UDP port used for authentication is 1645 and that for accounting is 1646. The password configured by this command must be the same as that of the RADIUS authentication/authorization packet configured by the command key authentication in the RADIUS Scheme View. The Switch 5500G-EI Family supports up to 16 local RADIUS authentication servers. Related commands: radius scheme, state and key.