3Com 5500G-EI Command Reference Guide - Page 150
routes or only the route best matching the destination address
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
150 CHAPTER 6: USING ROUTING PROTOCOL COMMANDS mask Enter either the IP subnet mask (in x.x.x.x format), or the subnet mask length (in the range 0 to 32). Optional. longer-match Enter to display an address route that matches the destination IP address in natural mask range . Optional. verbose Enter to display verbose information about both active and inactive routes. Without this parameter, this command only displays a summary of active routes. Optional. Description Use the display ip routing-table ip_address command to view routing information for a specific IP address, and you can also choose the type of information to display. If the destination address, ip_address, has a corresponding route in natural mask range, this command will display all subnet routes or only the route best matching the destination address, ip_address, is displayed. And only the active matching route is displayed. Use the display ip routing-table ip_address mask command to display the route that matches the specified IP destination address and subnet mask. Use the display ip routing-table ip_address longer-match command to display all destination address routes that match destination IP addresses in natural mask range. Use the display ip routing-table ip_address verbose command to display verbose information about both active and inactive routes. Example There is corresponding route in natural mask range. Display the summary. display ip routing-table 169.0.0.0 Routing Tables: Summary count:1 Destination/Mask Proto Pre Cost Nexthop 169.0.0.0/16 Static 60 0 2.1.1.1 Interface LoopBack1 There are corresponding routes in the natural mask range. Display the detailed information. display ip routing-table 169.0.0.0 verbose Routing Tables: Generate Default: no + = Active Route, - = Last Active, # = Both* = Next hop in use Summary count:2 **Destination: 169.0.0.0 Mask: 255.0.0.0 Protocol: #Static Preference: 60 *NextHop: 2.1.1.1 Interface: 2.1.1.1(LoopBack1) Vlinkindex: 0 State: Age: 3:47 Cost: 0/0 **Destination: 169.0.0.0 Mask: 255.254.0.0 Protocol: #Static Preference: 60 *NextHop: 2.1.1.1 Interface: 2.1.1.1(LoopBack1) Vlinkindex: 0 State: