3Com 5500G-EI Command Reference Guide - Page 63

Ethernet Port Configuration Commands 63 Parameter vlan_id_list: Enter a VLAN ID, or more than one VLAN ID, in the range 2 to 4094. The hybrid port will be added to the specified VLANs. This can be a single VLAN, a series of individual VLANs separated by a space, or the the first VLAN in a range of VLANs (vlan_id to last_vlan_id). You can enter up to ten vlan_id parameters in one port hybrid vlan command. tagged: Enter to tag the port for the specified VLAN. untagged: Enter to leave the port untagged for the specified VLAN. Description Use the port hybrid vlan command to add the port to the specified VLAN(s). The port needs to have been made a hybrid port before you can do this. See the related command below. Use the undo port hybrid vlan command to remove the port from the specified VLAN(s). A hybrid port can belong to multiple VLANs. A port can only be added to a VLAN if the VLAN has already been created. See the vlan vlan-vid command. Related command: port link-type. Example To add the port Ethernet1/0/1 to VLAN 2, VLAN 4 and all VLANs in the range 50 to 100 as a tagged port, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]interface Gigabitethernet 1/0/1 [SW5500-GigabitEthernet1/0/1]port hybrid vlan 2 4 50 to 100 tagged port link-type Syntax port link-type { access | hybrid | trunk | xrn-fabric } undo port link-type View Ethernet Port View Parameter access: Enter to configure the port as an access port. hybrid: Enter to configure the port as a hybrid port trunk: Enter to configure the port as a trunk port.