3Com 5500G-EI Command Reference Guide - Page 36

36 CHAPTER 1: USING SYSTEM ACCESS COMMANDS ■ system view ■ menu views, for example VLAN view, Ethernet port view, and so on. Related commands: return, system-view. Example To return to user view from system view, enter the following: [SW5500]quit return Syntax return View System view or higher Parameter None Description Use the return command to return to user view from any other view. Ctrl+Z performs the same function as the return command. To return to the next highest level of view, use quit. Example To return to user view from any other view (the example below shows the command entered from the system view), enter the following. system-view System View: return to User View with Ctrl+Z. [SW5500]return screen-length Syntax screen-length screen-length undo screen-length View User interface view Parameter screen-length: Enter the maximum number of information lines that you want to display on a terminal screen, ranging from 0 to 512. The default is 24. Description Use the command screen-length to configure how many information lines (maximum) will be displayed on the screen of a terminal. Use the command undo screen-length to restore the default of 24 lines.