3Com 5500G-EI Command Reference Guide - Page 461
Parameter, Description, Example, info-center channel, Syntax, command
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 461 highlights
Log Commands 461 Parameter size: Configure the size of buffer. buffersize: Size of buffer (number of messages which can be kept); By default, the size of the buffer is 256. Description Using display trapbuffer command, you can view the attribute of trapbuffer and the information recorded in trapbuffer. For the related commands, see info-center enable, info-center loghost, info-center logbuffer, info-center console channel, info-center monitor channel. Example Show the system trapbuffer attribute and the log information in trapbuffer. display trapbuffer Trapping Buffer Configuration and contents: enabled allowed max buffer size : 1024 actual buffer size : 256 channel number : 3 , channel name : trapbuffer dropped messages : 0 overwrote messages : 0 current messages : 6 Dec 31 14:01:25 2004 Quidway DEV/2/LOAD FINISHED: Trap 1.3.6.1.4.1.2011.2.23.1.12.1.20: frameIndex is 0, slotIndex 0.4 Dec 31 14:01:33 2004 Quidway DEV/2/BOARD STATE CHANGE TO NORMAL: Trap 1.3.6.1.4.1.2011.2.23.1.12.1.11: frameIndex is 0, slotIndex 0.2 Dec 31 14:01:40 2004 Quidway DEV/2/BOARD STATE CHANGE TO NORMAL: Trap 1.3.6.1.4.1.2011.2.23.1.12.1.11: frameIndex is 0, slotIndex 0. .... info-center channel name Syntax info-center channel channel-number name channel-name undo info-center channel channel-number View System view Parameter channel-number: Channel number, ranging from 0 to 9, that is, system has ten channels. channel-name: Specify the channel name with a character string not exceeding 30 characters, excluding "-", "/" or "\".