3Com 5500G-EI Command Reference Guide - Page 367

AAA Configuration Commands 367 View Local User View Parameter level: Specifies user priority level, an integer ranging from 0 to 3. Description Use the level command to configure user priority level. Use the undo level command to restore the default user priority level. By default, the user priority level is 0. Related command: local-user If the configured authentication mode is none authentication or password authentication, the command level that a user can access after login depends on the priority of user interface. In the case of authentication requiring both username and password, however, the accessible command level depends on user priority level. Example To set the priority level of the user 3Com to 3, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]local-user 3Com1 [SW5500-luser-3Com1]level 3 local-user Syntax local-user user-name undo local-user { user-name | all [ service-type { telnet | ftp | lan-access | ssh | terminal } ] } View System View Parameter user-name: Specifies a local username with a character string not exceeding 80 characters, excluding and ">". The @ character can only be used once in one username. The pure username (the part before @, namely the user ID) cannot exceed 55 characters. The user-name parameter is not case sensitive. service-type: Specifies the service type. telnet: The specified user type is telnet. ftp: The specified user type is ftp. lan-access: The specified user type is lan-access which mainly refers to Ethernet accessing users, 802.1x supplicants for example.