3Com 5500G-EI Command Reference Guide - Page 194

194 CHAPTER 6: USING ROUTING PROTOCOL COMMANDS Description Use the display ospf lsdb command to view database information about the OSPF connecting state. Example To display database information about the OSPF connecting state, enter the following: display ospf lsdb OSPF Process 1 with Router ID 1.1.1.1 The information displays in the following format: Link State Database Area: 0.0.0.0 Type LinkState ID AdvRouter Age Len Sequence Metric Rtr 2.2.2.2 2.2.2.2 465 36 8000000c 0 Rtr 1.1.1.1 1.1.1.1 449 36 80000004 0 Net 10.153.17.89 2.2.2.2 465 32 80000004 0 SNet 10.153.18.0 1.1.1.1 355 28 80000003 10 Area: 0.0.0.1 Type LinkState ID AdvRouter Age Len Sequence Metric Rtr 1.1.1.1 1.1.1.1 449 36 80000004 0 Rtr 3.3.3.3 3.3.3.3 429 36 8000000a 0 Net 10.153.18.89 3.3.3.3 429 32 80000003 0 SNet 10.153.17.0 1.1.1.1 355 28 80000003 10 ASB 2.2.2.2 1.1.1.1 355 28 80000003 10 AS External Database: Type LinkState ID AdvRouter Age Len Sequence Metric ASE 10.153.18.0 1.1.1.1 1006 36 80000002 1 ASE 10.153.16.0 2.2.2.2 798 36 80000002 1 ASE 10.153.17.0 2.2.2.2 623 36 80000003 1 ASE 10.153.17.0 1.1.1.1 1188 36 80000002 1 Where SpfTree SpfTree SpfTree Inter List Where SpfTree Clist SpfTree Inter List SumAsb List Where Ase List Uninitialized Uninitialized Ase List Table 31 Output Description of the display ospf lsdb Command Field Type LinkStateID AdvRouter Age Len Sequence Metric Where Description Type of the LSA Link state ID of the LSA Router ID of the router originating the LSA Age of the LSA Length of the LSA Sequence number of the LSA Cost from the router originating the LSA to LSA destination Location of the LSA display ospf lsdb ase OSPF Process 1 with Router ID 1.1.1.1 Link State Data Base type: ASE ls id: 2.2.0.0 adv rtr: 0.0.0.2 ls age: 349 len: 36