3Com 5500G-EI Command Reference Guide - Page 471

Log Commands 471 buffersize: Size of trap buffer (numbers of messages). channel: Configure the channel to output information to trap buffer. channel-number: Channel number, ranging from 0 to 9, that is, the system has ten channels. channel-name: Specify the channel name. Description Use the info-center trapbuffer command to output information to the trap buffer. Use the undo info-center trapbuffer command to cancel output information to trap buffer. By default, output information is transmitted to trap buffer and size of trap buffer is 256. This command takes effect only after the system logging is enabled. Related commands: info-center enable, display info-center. Example Send information to the trap buffer and sets the size of buffer as 30. system-view System View: return to User View with Ctrl+Z. [SW5500]info-center trapbuffer size 30 [SW5500] reset logbuffer Syntax reset logbuffer View User view Parameter None Description Use the reset logbuffer command to clear information in log buffer. Example Clear information in log buffer. reset logbuffer reset trapbuffer Syntax reset trapbuffer View User view