3Com 5500G-EI Command Reference Guide - Page 292

292 CHAPTER 8: USING QOS/ACL COMMANDS View Any view Parameter interface-name | interface-type interface-num: Interface of the Switch, for detailed a description, refer to the port command in this manual. unit-id: Unit ID of the Switch. Description Use the display qos-interface line-rate command to view the traffic rate limitations of the interface output. If you do not specify interface parameters, you will view the traffic rate limitations of all interfaces' output. If you enter interface parameters, you will view the parameter settings of traffic rate limitations of the specified interfaces' output. Example Display the parameter configuration of interface traffic rate limitation. system-view System View: return to User View with Ctrl+Z [SW5500] display qos-interface line-rate GigabitEthernet1/0/1: line-rate Outbound: 128 Kbps display qos-interface mirrored-to Syntax display qos-interface { interface-name | interface-type interface-num | unit-id } mirrored-to View Any view Parameter interface-name | interface-type interface-num: Interface of the Switch, for detailed description, refer to the port command in this manual. unit-id: Unit ID of the Switch. Description Use the display qos-interface mirrored-to command to view the settings of the traffic mirror. This command is used for displaying the settings of traffic mirror. The information displayed includes the ACL of traffic to be mirrored and the observing port. Related command: mirrored-to. Example To display the settings of traffic mirror, enter the following: display qos-interface gigabitethernet1/0/1 mirrored-to GigabitEthernet1/0/1: mirrored-to