3Com 5500G-EI Command Reference Guide - Page 306
QoS Profile, Configuration, Commands, apply qos-profile, Syntax, Parameter, Description, Example
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 306 highlights
306 CHAPTER 8: USING QOS/ACL COMMANDS QoS Profile Configuration Commands This section describes how to use the Quality of Service (QoS) Profile configuration commands on your Switch. apply qos-profile Syntax apply qos-profile profile-name undo apply qos-profile profile-name View Ethernet Port View Parameter profile-name: QoS profile name, a string of one to 32 characters, starting with letters [a-z, A-Z] and excluding all, interface, and user which are reserved as keywords. Description Use the apply qos-profile command to apply the QoS profile to the current port. Use the undo apply qos-profile command to remove the QoS profile from a port. You cannot delete a QoS profile which has been applied to a port. Likewise a profile has to be created before it can be assigned to a port. Example To apply the qos-profile student to the current port, enter the following: system-view System View: return to User View with Ctrl+Z [SW5500]interface gigabitethernet 1/0/1 [SW5500-GigabitEthernet1/0/1]apply qos-profile student display qos-profile Syntax display qos-profile { all | profile-name | interface { interface-name | interface-type interface-num } | user user-name } View Any view Parameter all: Displays all QoS profiles. profile-name: The profile name. interface { interface-name | interface-type interface-num }: Displays the QoS profile delivered to a specific port. user user-name: Displays the QoS profile mapped with a specific user.