3Com 5500G-EI Command Reference Guide - Page 360
Description, Example, cut connection, Syntax, Parameter
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 360 highlights
360 CHAPTER 11: USING AAA AND RADIUS COMMANDS access-limit max-user-number: Specifies the maximum number of users who access the device using the current user name. The argument max-user-number is in the range of 1 to 1024. ip: Specifies the IP address of a user. mac mac-address: Specifies the MAC address of a user. Where, mac-address takes on the hexadecimal format of HHHH-HHHH-HHHH-HHHH. vlan vlanid: Sets the VLAN attribute of user, in other words, the VLAN to which a user belongs. The argument vlanid is an integer in the range of 1 to 4094. location: Sets the port binding attribute of user. nas-ip ip-address: The IP address of the access server in the event of binding a remote port with a user. The argument ip-address is an IP address in dotted decimal format and defaults to 127.0.0.1. port portnum: Sets the port to which a user is bound. The argument portnum is represented by "SlotNumber SubSlotNumber PortNumber". If any of these three items is absent, the value 0 will be used to replace it. Description Use the attribute command to configure some attributes for specified local user. Use the undo attribute command to cancel the attributes that have been defined for this local user. It should be noted that the argument nas-ip must be defined for a user bound with a remote port, which is unnecessary, however, in the event of a user bound with a local port. Related command: display local-user. Example To configure the IP address 10.110.50.1 to the user JohnQ, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]local-user JohnQ New local user added. [SW5500-luser-JohnQ]ip 10.110.50.1 cut connection Syntax cut connection { all | access-type { dot1x | gcm | mac-authentication } | domain domain-name | interface interface-type interface-number | ip ip-address | mac mac-address | radius-scheme radius-scheme-name | vlan vlanid | ucibindex ucib-index | user-name user-name } View System View Parameter all: Configures to disconnect all connection.