3Com 5500G-EI Command Reference Guide - Page 54
display port, Syntax, Parameter, Description, Example, GigabitEthernet1/0/1 and GigabitEthernet1/0/2.
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
54 CHAPTER 2: USING PORT COMMANDS Loopback-detection is running Detection interval time is 30 seconds There is no port existing loopback link Table 7 Output Description of the Display Loopback-detection Command Field Loopback-detection is running Detection interval time is 30 seconds There is no port existing loopback link Description The Loopback-detection is enabled The detection interval is 30 seconds No port is in the loopback state display port Syntax display port { hybrid | trunk } View All views Parameter hybrid: Enter to display the hybrid ports. trunk: Enter to display the trunked ports. Description Use the display port hybrid command to view the ports whose link type is hybrid. Use the display port trunk command to view the ports whose link type is trunk. Example To display the currently configured hybrid ports, enter the following: display port hybrid The details display in the following format: The following hybrid ports exist: GigabitEthernet1/0/1 GibabitEthernet1/0/2 This example indicates that the current configuration has two hybrid ports, GigabitEthernet1/0/1 and GigabitEthernet1/0/2. display unit Syntax display unit unit-id interface View Any view Parameter unit-id: Specifies Unit ID, ranging from 1 to 8.