3Com 5500G-EI Command Reference Guide - Page 528

528 CHAPTER A: BOOTROM INTERFACE File Number 4 5 6 7 File Size(bytes) 576218 10301 10369 10369 File Name s4h03_04.web 3comoscfg.def 3comoscfg.cfg [test.cfg] Free Space: 10460160 bytes The current application file is s4b03_01_04s168.app (*)-with main attribute;(b)-with backup attribute (*b)-with both main and backup attribute Please input the file number to delete: The current application file is name and an * indicates the file in the list. If the filename is in brackets, for example [test.cfg], this indicates that the file has been deleted from the CLI but is still present in the recycle-bin. Modify Bootrom Select Option 5 at the prompt to allow the bootrom access password to be Password changed as follows: Old password: New password: XXXX Confirm password: XXXX Current password has been changed successfully! Enter Bootrom Upgrade Select Option 6 at the prompt to allow a bootrom file to be downloaded to Flash Menu and then automatically upgrade the bootrom to the new version as follows: Bootrom update menu: 1. Set TFTP protocol parameter 2. Set FTP protocol parameter 3. Set XMODEM protocol parameter 0. Return to boot menu For further information on downloading see "Boot Menu File Download Commands" on page 529. Skip Current Select Option 7 at the prompt to allow the Switch to be rebooted without loading Configuration File the current configurations as follows: The current setting is running configuration file when reboot. Are you sure to skip current configuration file when reboot? Yes or No(Y/N) The Switch will reboot using the factory defaults. Set Bootrom Password Enter Option 8 at the prompt to allow the bootrom super password to be disabled Recovery or enabled. The following is displayed: Warning: if disable the bootrom password recovery, the super password based on switch mac address is invalid! The current mode is enable bootrom password recovery.