2002 Ducati MH900e 900e Owners Manual - Page 78

Digital LCD functions Check When the ignition key is switched ON, the rev counter is set to zero, all figures on the LCD come on for 2 seconds, all warning lights come on and total distance covered is displayed. Odometer/trip meter Press button 1 with the key in the ON position to toggle odometer and trip meter indications. Resetting the trip meter Press button 1 to display trip meter indication. Hold down button 2 for at least 2 seconds to reset. Clock set-up Press button 1 to display odometer indication. Hold down button 2 for at least 2 seconds. Set AM/PM pressing button 1. Press button 2 to enter hour set-up mode; press button 1 repeatedly to change hour indication. Press button 2 to enter minute set-up mode. Hold down button 1 to increment minutes. Hold button down for over 5 seconds and minutes will increase faster. Press button 2 to exit set-up mode. Speed indication in kph or mph: Factory setting is kph. When you want to change from kph to mph or vice versa proceed as follows: Turn the ignition key to OFF. Hold down buttons 1 and 2 at the same time and turn the key to ON. If current setting is kph, the wording EU 12 will flash, whereas the wording USA will flash when current setting is mph. Press button 1 to toggle the EU and USA indications. Hold down button 2 for at least 5 seconds to store new setting. If you have followed the procedure correctly, the word OFF will appear. Position the key to OFF Switch key back to ON and the selected unit of measurement will appear. E 1 2 fig. 4