2002 Ducati MH900e 900e Owners Manual - Page 101

Warning If pressed accidentally, the pins (F, fig. 34) will cause the laminations of the quick couplings to close. Make sure the laminations are open. If not so, press the tabs (A, fig. 33) to open them. Connect the fuel sensor (3, fig. 33). Check that the key switch is turned to "OFF". Check that the switch (4, fig. 35) is in the (A) position. Turn the key to "ON". Press the switch (5) to pressurise the fuel system and wait for the fuel pump to stop running. Repeat cycle by moving switch (4) to (A); then press switch (5) again. During this procedure, check that fuel is not escaping past the quick couplings of the delivery and return lines. Set the key switch back to "OFF" again. To lock the tank, start the screws in their holes and torque them up to specified torque. Be sure to install the rubber spacers together with the tail fastening plate. closed push to open F A E open fig. 34 4 B A 5 fig. 35 35