Netgear XSM4324CS CLI Manual Software Version 12.x - Page 929
random-detect exponential weighting-constant, random-detect queue-parms
View all Netgear XSM4324CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 929 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches random-detect exponential weighting-constant This command is used to configure the WRED decay exponent for a CoS queue interface. The number argument is a value in the range of 0-15. Format Modes random-detect exponential-weighting-constant number Global Config Interface Config no random-detect exponential-weighting-constant Use this command to set the WRED decay exponent back to the default. Format Modes no random-detect exponential-weighting-constant Global Config Interface Config random-detect queue-parms This command is used to configure WRED parameters for each drop precedence level supported by a queue. It is used only when per-COS queue configuration is enabled (using the cos-queue random-detect command). Format Modes random-detect queue-parms queue-id-1 [queue-id-2 ... queue-id-n] min-thresh thresh-prec-1 ... thresh-prec-n max-thresh thresh-prec-1 ... thresh-prec-n drop-probability prob-prec-1 ... prob-prec-n Global Config Interface Config Each parameter is specified for each possible drop precedence (color of TCP traffic). The last precedence applies to all non-TCP traffic. For example, in a three-color system, three colors and one non-TCP precedence are specified for each parameter: green TCP, yellow TCP, red TCP, and non-TCP, respectively. Term min-thresh max-thresh drop-probability Definition The minimum threshold the queue depth (as a percentage) where WRED starts marking and dropping traffic. The maximum threshold is the queue depth (as a percentage) above which WRED marks/drops all traffic. The percentage probability that WRED will mark/drop a packet, when the queue depth is at the maximum threshold. (The drop probability increases linearly from 0 just before the minimum threshold, to this value at the maximum threshold, then goes to 100% for larger queue depths). Quality of Service Commands 929 CLI Command Reference Manual