Netgear XSM4324CS CLI Manual Software Version 12.x - Page 46
show stack-port stack-path, The output displays for a specific source unit in the stack. The value
View all Netgear XSM4324CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches RX Tunnelling In Pkts 0 RX Tunnelling In Pkts discarded 0 RX Tunnelling Out Pkts 0 RX Tunnelling Out Pkts discarded 0 OAM Events In 0 OAM Events In discarded 0 OAM Events Out 0 OAM Events Out discarded 0 BFD Events In 0 BFD Events In discarded 0 BFD Events Out 0 BFD Events Out discarded 0 Fabric Events In 0 Fabric Events In discarded 0 Fabric Events Out 0 Fabric Events Out discarded 0 Scan Add Requests In 0 Scan Del Requests In 0 Scan Notify(Run Handlers) Out 0 Scan Notify(Traverse Processing 0 show stack-port stack-path Use this command to display the route that a packet takes to reach its destination. This command lets you display the stack path to see if an error or packets loss occurs. Use the following optional keywords to specify the command output: • source-unit. The output displays for a specific source unit in the stack. The value for source-unit can be from 1 to 8. • all. The output displays for all units in the stack. • destination-unit. The output displays for a specific source unit in the stack. The value for destination-unit can be from 1 to 8. Format Mode show stack-port stack-path [source-unit | all] [destination-unit] Privileged EXEC Stacking Commands 46 CLI Command Reference Manual