Netgear XSM4324CS CLI Manual Software Version 12.x - Page 165
OpenFlow Commands
View all Netgear XSM4324CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches set clibanner Use this command to configure the prelogin CLI banner before displaying the login prompt. Format Mode set clibanner line Global Config Parameter line Description Banner text where "" (double quote) is a delimiting character. The banner message can be up to 2000 characters. no set clibanner Use this command to unconfigure the prelogin CLI banner. Format Mode no set clibanner Global Config OpenFlow Commands OpenFlow commands enable you to manage the switch from a centralized OpenFlow controller, using the OpenFlow protocol. openflow enable This command enables OpenFlow. Default Format Mode Disabled openflow enable Global Config no openflow enable This command disables OpenFlow. Format Mode no openflow enable Global Config openflow static-ip This command specifies the static IP address that must be used for OpenFlow. This static IP address is applied only when the static IP mode is enabled. For the static IP address to be used for OpenFlow, the switch must include an operational IP interface with the specified Management Commands 165 CLI Command Reference Manual