Netgear XSM4324CS CLI Manual Software Version 12.x - Page 745
IP Event Dampening Commands, ip ospf mtu-ignore, dampening
View all Netgear XSM4324CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 745 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Default Format Mode 1 ip ospf transmit-delay second Interface Config no ip ospf transmit-delay This command sets the default OSPF Transit Delay for the specified interface. Format Mode no ip ospf transmit-delay Interface Config ip ospf mtu-ignore This command disables OSPF maximum transmission unit (MTU) mismatch detection on an interface or range of interfaces. OSPF Database Description packets specify the size of the largest IP packet that can be sent without fragmentation on the interface. When a router receives a Database Description packet, it examines the MTU advertised by the neighbor. By default, if the MTU is larger than the router can accept, the Database Description packet is rejected and the OSPF adjacency is not established. Default Format Mode enabled ip ospf mtu-ignore Interface Config no ip ospf mtu-ignore This command enables the OSPF MTU mismatch detection. Format Mode no ip ospf mtu-ignore Interface Config IP Event Dampening Commands dampening Use this command to enable IP event dampening on a routing interface. Format Mode dampening [half-life period] [reuse-threshold suppress-threshold max-suppress-time [restart restart-penalty]] Interface Config Routing Commands 745 CLI Command Reference Manual