Netgear XSM4324CS CLI Manual Software Version 12.x - Page 488
Broadcast Storm Recovery Mode, 3x Flow Control Mode, storm-control unicast rate, show storm-control
View all Netgear XSM4324CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 488 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches storm-control unicast rate Use this command to configure the unicast storm recovery threshold for all interfaces (Global Config mode) or one or more interfaces (Interface Config mode) in packets per second. If the mode is enabled, unicast storm recovery is active, and if the rate of L2 broadcast traffic ingressing on an interface increases beyond the configured threshold, the traffic is dropped. Therefore, the rate of unicast traffic is limited to the configured threshold. The threshold rate can be in the range from 0-14880000. The default is 0. Default Format Mode 0 storm-control unicast rate threshold Global Config Interface Config no storm-control unicast rate This command sets the unicast storm recovery threshold to the default value for all interfaces (Global Config mode) or one or more interfaces (Interface Config mode) and disables unicast storm recovery. Format Mode no storm-control unicast rate Global Config Interface Config show storm-control This command displays switch configuration information. If you do not use any of the optional parameters, this command displays global storm control configuration parameters: • Broadcast Storm Recovery Mode may be enabled or disabled. The factory default is disabled. • 802.3x Flow Control Mode may be enabled or disabled. The factory default is disabled. Use the all keyword to display the per-port configuration parameters for all interfaces, or specify the unit/slot/port to display information about a specific interface. Format Mode show storm-control [all | unit/slot/port] Privileged EXEC Parameter Bcast Mode Bcast Level Bcast Action Definition Shows whether the broadcast storm control mode is enabled or disabled. The factory default is disabled. The broadcast storm control level. The broadcast storm recovery acton. Switching Commands 488 CLI Command Reference Manual