Netgear XSM4324CS CLI Manual Software Version 12.x - Page 349
show rmon collection history, This command displays the entries in the RMON history control table.
View all Netgear XSM4324CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 349 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Command example: (NETGEAR Switch) #show rmon alarms Index OID Owner 1 alarmInterval.1 MibBrowser 2 alarmInterval.1 MibBrowser Command example: (NETGEAR Switch) #show rmon alarm 1 Alarm 1 ---------OID: alarmInterval.1 Last Sample Value: 1 Interval: 1 Sample Type: absolute Startup Alarm: rising-falling Rising Threshold: 1 Falling Threshold: 1 Rising Event: 1 Falling Event: 2 Owner: MibBrowser show rmon collection history This command displays the entries in the RMON history control table. Format Mode show rmon collection history [interfaces unit/slot/port] Privileged Exec Term Description History Control Index An index that uniquely identifies an entry in the historyControl table. Each such entry defines a set of samples at a particular interval for an interface on the device. The range is 1 to 65535. History Control Data Source The source interface for which historical data is collected. History Control The requested number of discrete time intervals over which data is to be saved. The range is 1 to Buckets Requested 65535. The default is 50. History Control The number of discrete sampling intervals over which data shall be saved. This object is read-only. Buckets Granted The default is 10. Utility Commands 349 CLI Command Reference Manual