Netgear XSM4324CS CLI Manual Software Version 12.x - Page 185
boot autoinstall, boot host retrycount, boot host dhcp, TFTP server.
View all Netgear XSM4324CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches boot autoinstall Use this command to operationally start or stop the AutoInstall process on the switch. The command is non-persistent and is not saved in the startup or running configuration file. Default Format Mode stop boot autoinstall {start | stop} Privileged EXEC boot host retrycount Use this command to set the number of attempts to download a configuration file from the TFTP server. The number argument is a number in the range 1-3. Default Format Mode 3 boot host retrycount number Privileged EXEC no boot host retrycount Use this command to set the number of attempts to download a configuration file to the default value. Format Mode no boot host retrycount Privileged EXEC boot host dhcp Use this command to enable AutoInstall on the switch for the next reboot cycle. The command does not change the current behavior of AutoInstall and saves the command to NVRAM. Default Format Mode enabled boot host dhcp Privileged EXEC no boot host dhcp Use this command to disable AutoInstall for the next reboot cycle. Format Mode no boot host dhcp Privileged EXEC Utility Commands 185 CLI Command Reference Manual