Netgear XSM4324CS CLI Manual Software Version 12.x - Page 465
dot1x user, authentication enable, no dot1x unauthenticated-vlan
View all Netgear XSM4324CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 465 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no dot1x unauthenticated-vlan This command resets the unauthenticated-vlan associated with the port to its default value. Format Mode no dot1x unauthenticated-vlan Interface Config dot1x user This command adds the specified user to the list of users with access to the specified port or all ports. The user argument must be a configured user. Format Mode dot1x user user {unit/slot/port | all} Global Config no dot1x user This command removes the user from the list of users with access to the specified port or all ports. Format Mode no dot1x user user {unit/slot/port | all} Global Config authentication enable This command globally enables the Authentication Manager. Interface configuration takes effect only if the Authentication Manager is enabled with this command. Default Format Mode Disabled authentication enable Global Config no authentication enable This command disables the Authentication Manager. Format Mode no authentication enable Global Config authentication order This command sets the order of authentication methods used on a port. The available authentication methods are Dot1x, MAB, and captive portal. Ordering sets the order of methods that the switch attempts when trying to authenticate a new device connected to a port. If one method is unsuccessful or timed out, the next method is attempted. Switching Commands 465 CLI Command Reference Manual