Netgear XSM4324CS CLI Manual Software Version 12.x - Page 38
If you specify a value for, the following information displays
View all Netgear XSM4324CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Command example: (NETGEAR Switch) #show switch Management Standby Preconfig Plugged-in Switch Code SW Switch Status Model ID Model ID Status Version 1 Stack Mbr Platform v1 Platform v1 STM Mismatch 10.17.15.8 2 Mgmt Sw Platform v2 Platform v2 OK 10.17.15.8 If you specify a value for unit, the following information displays: Term Definition Management Status Indicates whether the switch is the Primary Management Unit, a stack member, or the status is unassigned. Hardware Management Preference The hardware management preference of the switch. The hardware management preference can be disabled or unassigned. Admin Management Preference The administrative management preference value assigned to the switch. This preference value indicates how likely the switch is selected as the Primary Management Unit. Switch Type The 32-bit numeric switch type. Model Identifier The model identifier for this switch. The model identifier is a 32-character field that is assigned by the device manufacturer to identify the device. Switch Status The switch status. Possible values are OK, Unsupported, Code Mismatch, Config Mismatch, or Not Present. Switch Description The switch description. Expected Code Version The expected firmware version. Detected Code Version The version of firmware that is running on this switch. If the switch is not present and the data is from the preconfiguration, the firmware version is None. Detected Code in Flash The version of the firmware that is currently stored in flash memory on the switch. The firmware executes after the switch is reset. If the switch is not present and the data is from the preconfiguration, the firmware version is None. SFS Last Attempt The stack firmware synchronization status in the last attempt for the specified unit. Status Stack Template ID The ID of the stack template. For example: 3. Stack Template Description The stack template description. For example: v1 and v2 Mix. Up Time The system up time. Stacking Commands 38 CLI Command Reference Manual