2015 Polaris Victory Vision Owners Manual - Page 91
2015 Polaris Victory Vision Manual
Page 91 highlights
Maintenance Taillight / Brake Light / Turn Signal Bulb Replacement 1. Open the saddlebags. Tip: Removal of the trunk or street panel is not necessary. Screws 2. Remove the license plate and bracket. See page 85. 3. Working from top to bottom, lift each edge of the tail molding to release the tabs. 4. Remove the six button-head screws from the lower rear bumper. Remove the five button-head screws that secure the taillight lenses. Tool: 4 mm Allen wrench Screws Screws Socket 5. Pull both taillights straight rearward to release all spring tabs from the rear fender and expose the bulb socket. Make a note of bulb socket orientation for reassembly. 6. Rotate the socket 1/4 turn counter-clockwise to remove it. Pull the bulb straight out of the socket and install a new bulb. 7. Reverse all steps to reassemble components. Tighten the button-head screws. Torque: 36 in-lbs (4 Nm) 89