2015 Polaris Victory Vision Owners Manual - Page 29

Instruments, Features and Controls Multi-Function Display Engine Error Codes The error screen displays only when the CHECK Error Code Failure Mode ENGINE light is on or when it goes on and off Number (0-9) Indicator (FMI) during one ignition cycle. Error codes are not stored. When the key is turned OFF, the code and message is lost, but will reappear if the fault reoccurs after restarting the engine. "Err" If the CHECK ENGINE indicator lamp illumiF C nates, retrieve the error codes from the display. Avg Speed Range Inst Time 1. If the error codes are not displayed, use the TRIP 1 km / h mode button to toggle until "Err" displays in : : . miles TRIP 2 / gal the clock area. 2. Record the three code numbers displayed in Suspect Parameter Number (SPN) the gear position, temperature and odometer displays. 3. See an authorized VICTORY dealer for code details and diagnosis. 88:88 188 88 8 8 8 8 8 Display Units (Standard/Metric) The display can be changed to display either standard or metric units of measurement. Tip: To exit the set-up mode at any time, wait 10 seconds.The display automatically exits and returns to the odometer display. Standard Display Distance Fuel Temperature Time Miles U.S. Gallons Fahrenheit 12-Hour Clock Metric Display Kilometers I = Imperial Gallons Liter = Liters Celsius 24-Hour Clock Display Units (Standard/Metric) 1. Turn the key to the OFF position. 2. Press and hold the mode button while turning the key to the ON or ACC position. 3. When the display flashes the distance setting, tap the mode button to advance to the desired setting. 4. Press and hold the mode button to save the setting and advance to the next display option. 5. Repeat the procedure to change remaining display settings. 27