2015 Polaris Victory Vision Owners Manual - Page 82

Maintenance Spark Plugs Replace spark plugs at the intervals recommended in the periodic maintenance table beginning on page 60. Always replace spark plugs in pairs. Spark Plug Specifications Spark Plug Type Spark Plug Gap Spark Plug Torque NGK DCPR6E .031-.035 inch (0.8-0.9 mm) 10.8-14.5 ft-lbs (14.6-19.7 Nm) 031-.035 inch (0.8-0.9 mm) 1. Make sure the engine is at room temperature. 2. Pull upward on the spark plug boot (not the wire) to remove the boot. CAUTION! Wear eye and face protection when using pressurized air. 3. To prevent debris from entering the spark plug hole, use compressed air to clean the area around the plugs before removing them. Remove the spark plugs. Tool: 5/8-inch plug socket Tip: Both spark plugs should have the same light or medium tan color deposits. The electrodes should be square with sharp edges. 4. Reinstall the spark plugs or install new plugs. Apply anti-seize compound sparingly to the threads. Engine Compression Test An engine compression test can be performed to monitor general engine condition. See the VICTORY Service Manual or your authorized VICTORY dealer. Exhaust System Inspection Check the exhaust system for stains from leaking exhaust gasses. Replace damaged or leaking exhaust gaskets. See the VICTORY Service Manual or your authorized VICTORY dealer. Check all exhaust system fasteners. Tighten loose clamps and fasteners. Do not overtighten. 3 4 1 1 Fastener Torques 1. 12 ft-lbs (16 Nm) 2. 35 ft-lbs (47.5 Nm) 3. 8 ft-lbs (11 Nm) 4. 35 in-lbs (4 Nm) 5. 31 ft-lbs (42 Nm) 3 4 5 5 5 2 2 80