2015 Polaris Victory Vision Owners Manual - Page 46
2015 Polaris Victory Vision Manual
Page 46 highlights
Pre-Ride Inspections Rear Brake Pedal 1. Press downward on the rear brake pedal. It should move freely and smoothly. It should not move more than 3/8 inch (8 mm) before resistance is firm. It should continue to feel firm, without loss of pressure, until the pedal is released. 2. Release the pedal. It should return to its rest position quickly when released. 3. If the rear brake pedal fails to perform as stated or travels too far before beginning to engage the brake, service the brakes before riding. 4. See page 37 for rear brake pedal adjustments. Resistance at 3/8 inch (8 mm) Rear Brake Fluid Level The rear brake fluid reservoir is located near the rear brake pedal, just inside the right lower leg fairing. View the reservoir from the front right side of the vehicle. 1. Position the motorcycle on level ground in the fully upright position. 2. View the brake fluid through the reservoir. 3. The fluid should be clear. Replace cloudy or contaminated fluid. 4. The fluid level should be between the minimum and maximum marks on the reservoir. Add brake fluid as needed. See page 77. Maximum Mark Minimum Mark 44