2015 Polaris Victory Vision Owners Manual - Page 74
2015 Polaris Victory Vision Manual
Page 74 highlights
Maintenance Throttle Control Inspection 1. With the engine OFF, rotate the throttle control grip fully open and then release it. It should rotate smoothly from the rest position to the completely open position. It should return to the rest position quickly when released. 2. Repeat the twist and release process with the handlebars turned fully right and fully left. 3. Remove the right side access cover. 4. Inspect throttle cables for frayed ends. 5. Service the throttle system if throttle operation is not smooth, if throttle grip does not return properly, or if cable ends are frayed. See the VICTORY Service Manual or your authorized VICTORY dealer. Cable Area Throttle Cable Freeplay Throttle freeplay is the amount of throttle control grip movement from the rest position to the point of cable resistance. Measure this distance. Freeplay should be 2-4 mm. Adjust throttle freeplay as needed. 1. Position the front wheel straight ahead. Stop the engine. 2-4 mm 2. Hold the adjuster nuts securely and loosen the lock nuts on both cables. Turn the lock nuts away from the adjuster nuts as far as possible. 3. Turn both adjuster nuts toward the lock nuts as far as possible for maximum freeplay in both cables. 4. Turn the adjuster on the throttle opening cable (front cable) away from the lock nut until throttle freeplay is 2-4 mm. 5. To adjust the closing cable (rear cable), hold the Adjuster Nut Lock Nut throttle grip lightly in the closed position. Turn the adjuster slowly outward until slight resistance is felt. 6. Turn the lock nuts on both cables until they are seated against the adjuster nuts. Hold each adjuster nut and tighten each lock nut securely. 7. Repeat the throttle control inspection. See page 72. 72