2015 Polaris Victory Vision Owners Manual - Page 79
2015 Polaris Victory Vision Manual
Page 79 highlights
Maintenance Rear Brake Fluid 1. Position the motorcycle on level ground in the fully upright position. 2. The rear brake fluid reservoir is located near the rear brake pedal, just inside the right lower leg fairing. Wipe the fluid container and the area around the reservoir cover with a clean cloth. 3. If the fluid level is low, inspect brake pads as outlined on page 45. If pads are not worn beyond the service limit, inspect the brake system for leaks. 4. To add fluid, remove the reservoir cover. Carefully add fluid to the recommended level. Do not overfill. 5. Reinstall the cover and diaphragm. 6. Wipe away any fluid spills. Check for signs of brake fluid leaks around hoses, fittings, reservoir, and brake calipers. Maximum Mark Minimum Mark Front Brake Fluid Change the brake fluid at the intervals recommended in the periodic maintenance table beginning on page 60. Maximum Level Do not attempt to change the anti-lock brake system fluid. See your VICTORY dealer. Minimum Level 1. Straddle the motorcycle and bring it to the fully upright position. Position the handlebars so that the fluid reservoir is level. Wipe the fluid container and the area around the reservoir cover with a clean cloth. 2. If the fluid level is low, inspect brake pads as outlined on page 45. If pads are not worn beyond the service limit, inspect the brake system for leaks. 3. To add fluid, remove the three reservoir cover screws. Remove the cover and diaphragm. Carefully add fluid to the top of the sight glass. Do not overfill. Reinstall the diaphragm, cover and screws. Torque: 25 in-lbs (3 Nm) 4. Wipe away any fluid spills. Check for signs of brake fluid leaks around hoses, fittings, reservoir, and brake calipers. Check for deterioration of hoses. 77
![](/manual_guide/autos/2015-polaris-victory-vision-owners-manual-5403d03/79.png)