2015 Polaris Victory Vision Owners Manual - Page 87
2015 Polaris Victory Vision Manual
Page 87 highlights
Maintenance Seat Removal / Installation 1. Open the glove compartment door and the fuel door. 2. Lift the console trim panel straight upward at each corner to remove it. Do not tip the panel rearward. 3. Remove the two seat bolts. Tool: 4 mm Allen wrench 4. Unplug the seat heater power connector (if equipped). Lift the front of the seat upward and pull forward to disengage the tab at the rear of the seat. 5. To install, reverse the above process, being sure to engage the tab at the back of the seat. 6. Tighten the seat bolts. Torque: 36 in-lbs (4 Nm) Seat Bolts 36 in-lbs (4 Nm) Windshield Trim Panel Removal Remove the windshield trim panel to access fuse boxes, the manual windshield adjustment mechanism, the headlamp adjustment knob and the front turn signal bulbs. 1. Lift each panel end upward to release the ends. 2. Carefully slide the panel slightly toward the windshield to disengage the lower tabs. Remove the panel. 3. Unplug the antenna. 4. Reverse all steps to reinstall the trim panel. 85