2015 Polaris Victory Vision Owners Manual - Page 57
2015 Polaris Victory Vision Manual
Page 57 highlights
Operation Using Cruise Control Resume Speed 1. Disengage the cruise control with the brake, throttle or clutch. 2. Press the resume button (RES) to return to the set speed. (Type R: You must wait at least 3 seconds after disengaging cruise control before pressing resume. If the resume button is pressed within 3 seconds of disengaging, the cruise control may not engage, even if the indicator illuminates. This is a safety feature that prevents cruise control from engaging if a button is stuck. To continue using cruise control, disengage it and wait 3 seconds before pressing resume.) Tip: Turning the cruise control master switch off will erase the set speed from memory and disengage the cruise control. Accelerate Accelerate Tap and release the accelerate (ACC) button to increase speed in approximately 1 MPH (1-2 km/h) increments. Press and hold the ACC button to accelerate to a new SET speed (resets when button is released). On vehicles without Type R cruise control, the speed will reset when the button is released or after a maximum acceleration of approximately 10 MPH (16 km/h), whichever comes first. Tip: If you use the throttle to accelerate and then release it, the cruise control will resume the previously set speed. Resume Decelerate Tap and release the decelerate (DEC) button to decrease speed in approximately 1 MPH (1-2 km/h) increments. Press and hold the DEC button to decelerate to a new SET speed (resets when button is released), or to the minimum cruise speed of 25 MPH (40 km/h). Cancel Cruise Control To temporarily cancel the cruise control and allow use of the Off resume feature: • apply the brakes • close the throttle • disengage the clutch To cancel the cruise control and erase the set speed from memory, press OFF. Decelerate 55