2015 Polaris Victory Vision Owners Manual - Page 129
2015 Polaris Victory Vision Manual
Page 129 highlights
CB Radio / ICOM System Push-to-Talk (PTT) Press and hold the top or bottom of the PTT button to transmit over CB radio. The passenger must push and hold the rear PTT button. Squelch Squelch blocks undesired signals and noise by allowing the reception of signals only over a specified level. Press and release + SQUELCH 8 the SQ (+) or SQ SQ (-) buttons to adjust the squelch to any level between OPEN and CLOSED. When squelch is set to OPEN, no filtering occurs. Setting squelch to CLOSED blocks all signals, including strong signals. To set the squelch level, first lower the squelch level until noise or static is audible. Gradually increase the squelch level until the noise or static is gone. Press S/E on the left control to exit the screen and return to the main display. "TX" will display on the console screen when one of the PTT buttons is pressed. "RX" will display when the CB is receiving a transmission. FM ICOM TX19 100.5 Transmitting Driver CB Radio Volume To change + CB VOL 15 settings, enter the mode menu. Press (+) or (-) on the console panel to adjust settings. Press S/E to save and exit. Tip: The CB volume can also be set using the hand control when the CB is receiving. FM ICOM RX19 100.5 Receiving Passenger CB Radio Volume The passenger can control rear headset volume when Entertainment, CB radio or ICOM is active. Tip: Each volume setting is independently adjustable. Press (+) or (-) on the passenger control to raise or lower volume. 127