2015 Polaris Victory Vision Owners Manual - Page 77
2015 Polaris Victory Vision Manual
Page 77 highlights
Maintenance Mechanical Clutch Lever Lubrication 1. Remove the right side access cover. Loosen the clutch cable adjuster lock nut. 2. Turn the cable adjuster completely inward to provide maximum lever freeplay. 3. Remove the clutch lever pivot nut and screw. Disconnect the clutch cable from the clutch lever. 4. Remove any old grease and dirt from the lever and housing. Lubricate the clutch lever and pivot screw with VICTORY Moly Assembly Grease or VICTORY All Purpose Grease. 5. Reconnect the clutch cable. Reinstall the lever, pivot screw and nut. Hold the screw down and tighten the nut. Torque: 40 in-lbs (5 Nm) Pivot Screw AP Pivot Nut 6. Adjust clutch lever freeplay. See page 74. Mechanical Clutch Cable Lubrication Lubricate control cable ends at the intervals recommended in the periodic maintenance table beginning on page 60. NOTICE: External casings are factory-lubricated. Additional lubrication could be detrimental to cable performance. Verify proper routing and smooth movement. Inspect for damage to the external casing, and inspect exposed cable wire for fraying, kinks or corrosion. Replace any damaged, sticky or sluggish cable. 1. Disconnect the cable at the clutch lever and at the primary cover. 2. Lubricate the barrel ends with VICTORY All Purpose Grease or equivalent. 3. Reconnect the cable and adjust freeplay as needed. 75