Denon AVR-4306 Owners Manual - Page 91

for the different channels

Page 91 highlights

Advanced Setup - Part 2 Advanced Setup - Part 2 • If "LFE+Main" is set at "Subwoofer Setup", "SW:LFE+Main" ( page 83) is displayed at the top right of the screen. 3 Press the CURSOR F or G button to select the frequency. 2 Press the CURSOR D or H button to select the surround mode, then press the CURSOR F or G button to select the surround speaker. • We recommend using with the crossover frequency set to "80Hz", but depending on the speaker, setting it to a different frequency may improve frequency response near the crossover frequency. • The crossover frequency mode is valid only when subwoofer is set to "ON", and when one or more speakers are set to "SMALL", as described in section "Speaker Configuration" settings ( page 82). Setting the crossover frequency individually for the different channels 1 Press the CURSOR F or G button to select "Advanced" at the "Crossover Frequency" screen. 4 Press the ENTER button to enter the setting. • The "Speaker Setup" menu reappears. • If "LFE" is selected at "Subwoofer Setup", the frequencies can only be selected for speakers set to "Small" at "Speaker Configuration". • If "LFE+Main" is set at "Subwoofer Setup", the frequencies can be selected regardless of the speaker size setting. A: When surround speakers A is used. B: When surround speakers B is used. A + B: When both surround speakers A and B are used. 3 Press the ENTER button to enter the setting. • The "Speaker Setup" menu reappears. • For the "WIDE SCREEN" and "7CH STEREO" DSP simulation modes, the surround speakers can be set separately. 2 About Speaker type setting when using both surround speakers A and B • If "Small" is set for either surround speakers A or B, the output is the same as when "Small" is set for both A and B. 2 Press the CURSOR D or H button to select the speaker to be set. Selecting the Surround Speakers for the different surround modes • This menu is displayed when both surround speakers A and B are used. • At this screen preset the surround speakers to be used in each surround modes. 1 Press the CURSOR D or H button to select "Surround Sp Setup" at the "Speaker Setup" menu, then press the ENTER button. • The "Surround Sp Setup" screen appears. 86

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146

86
Advanced Setup – Part 2
Advanced Setup – Part 2
• If “LFE+Main” is set at “Subwoofer Setup”, “SW:LFE+Main”
(
page 83) is displayed at the top right of the screen.
• We recommend using with the crossover frequency set to
“80Hz”, but depending on the speaker, setting it to a different
frequency may improve frequency response near the crossover
frequency.
• The crossover frequency mode is valid only when subwoofer is
set to “ON”, and when one or more speakers are set to
“SMALL”, as described in section “Speaker Configuration”
settings (
page 82).
• If “LFE” is selected at “Subwoofer Setup”, the frequencies
can only be selected for speakers set to “Small” at “Speaker
Configuration”.
• If “LFE+Main” is set at “Subwoofer Setup”, the frequencies
can be selected regardless of the speaker size setting.
• For the “WIDE SCREEN” and “7CH STEREO” DSP simulation
modes, the surround speakers can be set separately.
Setting the crossover frequency individually
for the different channels
1
Press the
CURSOR
F
or
G
button to select
“Advanced” at the “Crossover
Frequency”
screen.
2
Press the
CURSOR
D
or
H
button to select the
speaker to be set.
3
Press the
CURSOR
F
or
G
button to select the
frequency.
Selecting the Surround Speakers for the
different surround modes
• This menu is displayed when both surround speakers A and B
are used.
• At this screen preset the surround speakers to be used in each
surround modes.
1
Press the
CURSOR
D
or
H
button to select
“Surround Sp Setup” at the “Speaker Setup”
menu, then press the
ENTER
button.
• The “Surround Sp Setup” screen appears.
2
Press the
CURSOR
D
or
H
button to select the
surround mode, then press the
CURSOR
F
or
G
button to select the surround speaker.
A:
When surround speakers A is used.
B:
When surround speakers B is used.
A + B:
When both surround speakers A and B are used.
3
Press the
ENTER
button to enter the setting.
• The “Speaker Setup” menu reappears.
4
Press the
ENTER
button to enter the setting.
• The “Speaker Setup” menu reappears.
2
About Speaker type setting when using both
surround speakers A and B
• If “Small” is set for either surround speakers A or B, the output
is the same as when “Small” is set for both A and B.