Denon AVR-4306 Owners Manual - Page 52

Basic Operation FUNCTION CURSOR ENTER 2 Connections Connect one side of the Ethernet cable (CAT-5) to the ETHERNET terminal on the AVR-4306's rear panel, the other side to the router. Listening to Internet radio Basic Operation The required system connections and settings must be made in order to listen to Internet radio. "Update?" appears on the display when connecting to an Internet radio station for the first time. 1 Select the input source to "AUX/Net". • The "Network Audio" menu screen appears. 2 DTU (Digital tuner) system buttons The digital tuner system buttons shown on the diagram below are used for Network Audio operations. Internet radio (Main unit) (Remote control unit in the AMP mode) A ~ G •, ª MODE MEMO •, ª, 0, 1 ENTER CH +, - 1 ~ 8 : Preset memory blocks : Character search : Configuration mode selection : Preset and favorite registration : Cursor up, down, left and right : Enter settings : Preset channel selection : Preset numbers To WAN side To LAN side port To LAN side port Modem Router LAN port/Ethernet port 2 Press the CURSOR D or H button to select "Internet Radio", then press the ENTER or CURSOR G button. • The initial screen when not connected to the Internet is displayed. Computer 2 Network settings When using a broadband router (DHCP function), the network settings are made automatically, so there is no need to make the settings from the setup menu. If the broadband router's DHCP function is turned off, make the "Network Setup" ( page 80, 81). 3 Connecting to an Internet radio station for the first time: Press the ENTER or CURSOR G button. • The update screen appears. 47