Denon AVR-4306 Owners Manual - Page 20
The video conversion function, On screen display for component video outputs and HDMI output - remote control
View all Denon AVR-4306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Connecting Other Sources The video conversion function The AVR-4306 is equipped with a function for up and down converting video signals. Because of this, the AVR-4306's MONITOR OUT terminal can be connected to the monitor (TV) with a set of cables offering a higher quality connection, regardless of how the player and the AVR-4306's video input terminals are connected. Generally speaking, analog video connections using the component video terminals offer the highest quality playback, followed by connections using the S-Video terminals, then connections using the regular video terminals (yellow). NOTE: • It is not possible to down-convert from HDMI input signals to the component, S-Video or composite video monitor output terminals. • Video down conversion to the MAIN ZONE's monitor output is only possible when the component video input resolution is 480i (interlaced standard definition video - NTSC format, for North America) or 576i (interlaced standard definition video - PAL format, for Europe and other countries). • To set the video conversion function for the MAIN ZONE to "OFF" ( page 72). The flow of the video signals. (HDMI terminal) (Component Video terminals) (S-Video terminal) (HDMI terminal) (Component Video terminals) (S-Video terminal) 2 The analog video to HDMI conversion function: • The AVR-4306's video up-conversion function lets you output analog video input signals (component - 480i/576i, 480p/576p, 1080i or 720p; S-Video and composite video - 480i/576i) to the HDMI monitor output terminal. • With the AVR-4306, the resolution of the signal output to the HDMI MONITOR OUT terminal can be selected ( page 72, 73). The resolutions with which the monitor is compatible can be checked using the STATUS button on the main unit or the ON SCREEN button on the remote control unit. (Video terminal) This unit's input terminals (Video terminal) This unit's output terminals : only MAIN ZONE 480i/576i • If you do not want to use the function for converting analog video signals to HDMI signals, select "OFF" for "Analog to HDMI Convert" at "Setting the HDMI Out Setup"( page 72, 73). In this case, the function for video up conversion to the component video terminal operates. On screen display for component video outputs and HDMI output • When viewing component video signals or HDMI signals via the AVR-4306, the on screen display is displayed on the monitor when the "System Setup" operations are performed and when the remote control unit's ON SCREEN button is operated. • To view the on screen display using an HDMI monitor, set "Analog to HDMI Convert" at "HDMI Out Setup" to "ON" (default). • When only component video signals are input to the AVR-4306, the characters of the on screen display are not displayed over the picture. 15 Connecting Other Sources