Denon AVR-4306 Owners Manual - Page 72
Setting the Digital In Assignment, Setting the EXT. IN Setup, Setting the DENON LINK
View all Denon AVR-4306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Advanced Setup - Part 1 Audio Input Setup Make the audio-related settings. Setting the Digital In Assignment This setting assigns the digital input terminals of the AVR-4306 for the different input sources. 4 Press the ENTER button to enter the setting. • The "Audio Input Setup" menu reappears. Advanced Setup - Part 1 2 Press the CURSOR D or H button to select "DLINK" setting, then press the CURSOR F or G button to select the input signal (ANALOG or EXT. IN). 1 Press the CURSOR D or H button to select "Audio Input Setup" at the "System Setup Menu", then press the ENTER button. • The "Audio Input Setup" menu screen appears. 2 Press the CURSOR D or H button to select "Digital In Assign", then press the ENTER button. • The "Digital In Assign" menu screen appears. • The OPTICAL 3 and 4 terminals on the AVR-4306's rear panel are equipped with an optical digital output terminal for recording digital audio signals to a CD recorder, MD recorder, or other digital audio recording deck. Use this for digital recording between a digital audio source (stereo - 2 channel) and a digital audio recorder. • "PHONO" and "TUNER" cannot be selected on the "Digital In Assign" screen. • When "DENON LINK" is assigned, PCM signals and Network Audio signals (Internet radio, music server or USB) input from the digital audio input terminal cannot be output from the analog REC OUT terminals or ZONE2 / ZONE3 audio output terminal ( page 60, 61 or 64). • It is not possible to make the "Digital In Assign" settings for the function assigned at "iPod Assign". Select the input for the playback of signals that cannot be transferred by DENON LINK. Setting the EXT. IN Setup • Set the method of playback of the analog input signal connected to the EXT. IN (8CH) terminals. • Refer to "Connecting the external inputs (EXT. IN) terminals" ( page 17). 2 Setting the DENON LINK • When a DENON DVD player and the DENON LINK have been connected, be sure to make a setting to "DENON LINK" with "Setting the Digital In Assignment". • When the input mode is AUTO and the signals are not be able to transferred by DENON LINK, the unit automatically changes over the input to the selected signals (ANALOG or EXT. IN ). • Refer to "DENON LINK connections" ( page 19). 1 Press the CURSOR D or H button to select "EXT. IN Setup" at the "Audio Input Setup" menu, then press the ENTER button. • The "EXT. IN Setup" screen appears. 3 Press the CURSOR D or H button to select the input source, then press the CURSOR F or G button to select the digital input terminal. Select from among COAX 1 to 2, OPT 1 to 5. If the same digital input terminal is selected, the setting for the input source that was previously assigned switches to "OFF". The HDMI input terminal is displayed when it is assigned to the input source at "HDMI In Assign" ( page 71). When "Yes" is selected for "Default", the settings are automatically reset to the default values. 1 Press the CURSOR D or H button to select the input source, then press the CURSOR F or G button to select "DLINK". 2 Press the CURSOR D or H button to select the item to be set, then press the CURSOR F or G button to select the parameter. 67