Denon AVR-4306 Owners Manual - Page 100
Dolby Digital and Dolby Pro Logic
View all Denon AVR-4306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Additional Information Surround The AVR-4306 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. [1] Dolby Surround q Dolby Digital Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories. Dolby Digital consists of up to "5.1" channels - front left, front right, center, surround left, surround right, and an additional channel exclusively reserved for additional deep bass sound effects (the Low Frequency Effects - LFE - channel, also called the ".1" channel, containing bass frequencies of up to 120 Hz). Unlike the analog Dolby Pro Logic format, Dolby Digital's main channels can all contain full range sound information, from the lowest bass, up to the highest frequencies - 22 kHz. The signals within each channel are distinct from the others, allowing pinpoint sound imaging, and Dolby Digital offers tremendous dynamic range from the most powerful sound effects to the quietest, softest sounds, free from noise and distortion. 2 Dolby Digital and Dolby Pro Logic Comparison of home surround systems Dolby Digital Dolby Pro Logic No. recorded channels (elements) 5.1 ch 2 ch No. playback channels 5.1 ch 4 ch Playback channels (max.) Audio processing High frequency playback limit of surround channel L, R, C, SL, SR, SW Digital discrete processing Dolby Digital encoding/ decoding L, R, C, S (SW - recommended) Analog matrix processing Dolby Surround 20 kHz 7 kHz 2 Dolby Digital compatible media and playback methods Marks indicating Dolby Digital compatibility: The following are general examples. Also refer to the player's operating instructions. Media DVD 1 Dolby Digital output terminals Playback method (reference page) Optical or coaxial digital output (same as for PCM) 1 Set the input mode to "AUTO" ( page 27). Others (satellite broadcasts, CATV, etc.) Optical or coaxial digital output (same as for PCM) Set the input mode to "AUTO" ( page 27). 1: Some DVD digital outputs have the function of switching the Dolby Digital signal output method between "bit stream" and "(convert to) PCM". When playing in Dolby Digital surround on the AVR-4306, switch the DVD player's output mode to "bit stream". In some cases players are equipped with both "bit stream + PCM" and "PCM only" digital outputs. In this case connect the "bit stream + PCM" terminals to the AVR-4306. w Dolby Pro LogicII • Dolby Pro LogicII is a new multi-channel playback format developed by Dolby Laboratories using feedback logic steering technology and offering improvements over conventional Dolby Pro Logic circuits. • Dolby Pro LogicII can be used to decode not only sources recorded in Dolby Surround ( ) but also regular stereo sources into five channels (front left, front right, center, surround left and surround right) to achieve surround sound. • Whereas with conventional Dolby Pro Logic the surround channel playback frequency band was limited, Dolby Pro LogicII offers a wider band range (20 Hz to 20 kHz or greater). In addition, the surround channels were monaural (the surround left and right channels were the same) with previous Dolby Pro Logic, but Dolby Pro LogicII they are played as stereo signals. • Various parameters can be set according to the type of source and the contents, so it is possible to achieve optimum decoding ( page 33). Additional Information e Dolby Pro LogicIIx • Dolby Pro LogicIIx furthers the matrix decoding technology of Dolby Pro LogicII to decode audio signals recorded on two channels into up to 7.1 playback channels, including the surround back channel. Dolby Pro LogicIIx also allows 5.1channel sources to be played in up to 7.1 channels. The mode can be selected according to the source. The Music mode is best suited for playing music, the Cinema mode for playing movies, and the Game mode for playing games. The Game mode can only be used with 2-channel audio sources. Sources recorded in Dolby Surround • These are sources in which three or more channels of surround have been recorded as two channels of signals using Dolby Surround encoding technology. • Dolby Surround is used for the sound tracks of movies recorded on DVDs, LDs and video cassettes to be played on stereo VCRs, as well as for the stereo broadcast signals of FM radio, TV, satellite broadcasts and cable TV. • Decoding these signals with Dolby Pro Logic makes it possible to achieve multi-channel surround playback. The signals can also be played on ordinary stereo equipment, in which case they provide normal stereo sound. • There are two types of DVD Dolby Surround recording signals. q 2-channel PCM stereo signals w 2-channel Dolby Digital signals 2 Sources recorded in Dolby Surround are indicated with the logo mark shown below Dolby Surround support mark: Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. 95