Netgear M4300-28G CLI Manual Software Version 12.x - Page 85
Hypertext Transfer Protocol Commands
View all Netgear M4300-28G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Command example: (NETGEAR Switch) #show management access-list List Name mgmtacl List Admin Mode Disabled Packets Filtered 0 Rules: permit ip-source 192.168.2.10 mask 255.255.255.255 service ssh priority 1 permit ip-source 192.168.2.182 mask 255.255.255.255 service ssh priority 2 permit ip-source 192.168.2.23 mask 255.255.255.255 service ssh priority 3 NOTE: All other access is implicitly denied. show management access-class This command displays information about the configured management ALC. Format Mode show management access-class Privileged EXEC Field List Name List Admin Mode Packets Filtered Definition The name of the management ACL The administrative mode of the management ACL. To activate a management ACL, enter the management access-class command (see management access-class on page 84). The number of packets filtered by the management ACL Command example: (NETGEAR Switch) #show management access-class List Name mgmtacl List Admin Mode Disabled Packets Filtered 0 Hypertext Transfer Protocol Commands This section describes the commands you use to configure Hypertext Transfer Protocol (HTTP) and secure HTTP access to the switch. Access to the switch by using a Web browser is enabled by default. Everything you can view and configure by using the CLI is also available by using the web. Management Commands 85 CLI Command Reference Manual