Netgear M4300-28G CLI Manual Software Version 12.x - Page 650
ip local-proxy-arp, arp cachesize, arp dynamicrenew
View all Netgear M4300-28G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 650 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no ip proxy-arp This command disables proxy ARP on a router interface. Format Mode no ip proxy-arp Interface Config ip local-proxy-arp Use this command to allow an interface to respond to ARP requests for IP addresses within the subnet and to forward traffic between hosts in the subnet. Default Format Mode disabled ip local-proxy-arp Interface Config no ip local-proxy-arp This command resets the local proxy ARP mode on the interface to the default value. Format Mode no ip local-proxy-arp Interface Config arp cachesize This command configures the ARP cache size. The ARP cache size value is a platform specific integer value. The default size also varies depending on the platform. Format Mode arp cachesize platform-specific-integer-value Global Config no arp cachesize This command configures the default ARP cache size. Format Mode no arp cachesize Global Config arp dynamicrenew This command enables the ARP component to automatically renew dynamic ARP entries when they age out. When an ARP entry reaches its maximum age, the system must decide whether to retain or delete the entry. If the entry has recently been used to forward data packets, the system will renew the entry by sending an ARP request to the neighbor. If the neighbor responds, the age of the ARP cache entry is reset to 0 without removing the entry Routing Commands 650 CLI Command Reference Manual