Netgear M4300-28G CLI Manual Software Version 12.x - Page 335
green-mode eee, green-mode eee tx-idle-time, no green-mode energy-detect
View all Netgear M4300-28G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 335 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no green-mode energy-detect Use this command to disable energy-detect mode on the interface(s). Format Mode no green-mode energy-detect Interface Config green-mode eee Use this command to enable EEE low-power idle mode on an interface or on a range of interfaces. The EEE mode enables both send and receive sides of the link to disable some functionality for power saving when lightly loaded. The transition to EEE low-power mode does not change the port link status. Frames in transit are not dropped or corrupted in transition to and from this mode. Default Format Mode disabled green-mode eee Interface Config no green-mode eee Use this command to disable EEE mode on the interface(s). Format Mode no green-mode eee Interface Config green-mode eee tx-idle-time Use this command to configure the EEE mode transmit idle time for an interface or range of interfaces. The idle time is in microseconds (0-4294977295). The transmit idle time is the amount of time the port waits before moving to the MAC TX transitions to the LPI state. Default Format Mode 0 green-mode eee tx-idle-time microseconds Interface Config no green-mode eee tx-idle-time Use this command to return the EEE idle time to the default value. Format Mode no green-mode eee tx-idle-time Interface Config Utility Commands 335 CLI Command Reference Manual