Netgear M4300-28G CLI Manual Software Version 12.x - Page 47
Stack Firmware Synchronization Commands
View all Netgear M4300-28G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Stack Firmware Synchronization Commands Stack firmware synchronization (SFS) provides an automatic mechanism to synchronize the firmware on all stack members whose firmware version differs from the version running on the stack manager. This operation can result in either an upgrade or downgrade of firmware on the mismatched stack member. However, this operation does not attempt to synchronize the stack to the latest firmware in the stack. boot auto-copy-sw (for stack firmware synchronization) Use this command to enable stack firmware synchronization. Default Format Mode Disabled boot auto-copy-sw Privileged EXEC no boot auto-copy-sw Use this command to disable stack firmware synchronization. Format Mode no boot auto-copy-sw Privileged EXEC boot auto-copy-sw trap (for stack firmware synchronization) Use this command to send SNMP traps related to stack firmware synchronization. Default Format Mode Enabled boot auto-copy-sw trap Privileged EXEC no boot auto-copy-sw trap Use this command to disable sending SNMP traps related to stack firmware synchronization. Format Mode no boot auto-copy-sw trap Privileged EXEC Stacking Commands 47 CLI Command Reference Manual