Netgear M4300-28G CLI Manual Software Version 12.x - Page 268
next-server, option, no netbios-node-type
View all Netgear M4300-28G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 268 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no netbios-node-type This command removes the NetBIOS node Type. Format Mode no netbios-node-type DHCP Pool Config next-server This command configures the next server in the boot process of a DHCP client.The address parameter is the IP address of the next server in the boot process, which is typically a TFTP server. Default Format Mode inbound interface helper addresses next-server address DHCP Pool Config no next-server This command removes the boot server list. Format Mode no next-server DHCP Pool Config option The option command configures DHCP Server options. The code parameter specifies the DHCP option code and ranges from 1-254. The ascii string parameter specifies an NVT ASCII character string. ASCII character strings that contain white space must be delimited by quotation marks. The hex string parameter specifies hexadecimal data. In hexadecimal, character strings are two hexadecimal digits. You can separate each byte by a period (for example, a3.4f.22.0c), colon (for example, a3:4f:22:0c), or white space (for example, a3 4f 22 0c). Default Format Mode none option code {ascii string | hex string1 [string2...string8] | ip address1 [address2...address8]} DHCP Pool Config Utility Commands 268 CLI Command Reference Manual