Netgear M4300-28G CLI Manual Software Version 12.x - Page 1057
IPv6 Multicast Forwarder
View all Netgear M4300-28G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1057 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches IPv6 Multicast Forwarder ipv6 mroute This command configures an IPv6 Multicast Static Route for a source. Default Format Mode No MRoute is configured on the system. ipv6 mroute src-ip-addr src-mask rpf-addr [interface] preference Global Config Parameter src-ip-addr src-mask rpf-ip-addr interface preference Description The IP address of the multicast source network. The IP mask of the multicast data source. The IP address of the RPF next-hop router toward the source. [Optional] Specify the interface if the RPF Address is a link-local address. The administrative distance for this Static MRoute, that is, the preference value. The range is 1 to 255. no ipv6 mroute This command removes the configured IPv6 Multicast Static Route. Format Mode no ip mroute src-ip-addr Global Config Note: There is no specific IP multicast enable for IPv6. Enabling of multicast at global config is common for both IPv4 and IPv6. show ipv6 mroute Use this command to show the mroute entries that are specific to IPv6. (This command is the IPv6 equivalent of the IPv4 show ip mroute command.) Format Modes show ipv6 mroute [detail | summary] Privileged EXEC User EXEC IPv6 Multicast Commands 1057 CLI Command Reference Manual