Netgear M4300-28G CLI Manual Software Version 12.x - Page 19
Table 5., CLI Command Modes continued, Software Modules, CLI Command Reference Manual
View all Netgear M4300-28G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 5. CLI Command Modes (continued) Command Mode Prompt Mode Description Line Console Switch (config-line)# Contains commands to configure outbound telnet settings and console interface settings, as well as to configure console login/enable authentication. Line SSH Switch (config-ssh)# Contains commands to configure SSH login/enable authentication. Line Telnet Switch (config-telnet)# Contains commands to configure telnet login/enable authentication. AAA IAS User Config Switch (Config-IAS-User)# Allows password configuration for a user in the IAS database. Mail Server Config Switch (Mail-Server)# Allows configuration of the email server. Policy Map Config Switch (Config-policy-map)# Contains the QoS Policy-Map configuration commands. Policy Class Config Switch(Config-policy-class-map)# Consists of class creation, deletion, and matching commands. The class match commands specify Layer 2, Layer 3, and general match criteria. Class Map Config Switch (Config-class-map)# Contains the QoS class map configuration commands for IPv4. Ipv6_Class-Map Config Switch (Config-class-map)# Contains the QoS class map configuration commands for IPv6. Router OSPF Config Switch (Config-router)# Contains the OSPF configuration commands. Router OSPFv3 Config Switch (Config rtr)# Contains the OSPFv3 configuration commands. Router RIP Config Switch (Config-router)# Contains the RIP configuration commands. BGP Router Config Switch (Config-router)# Contains the BGP4 configuration commands. Route Map Config Switch (config-route-map)# Contains the route map configuration commands. IPv6 Address Family Config Switch (Config-router-af)# Contains the IPv6 address family configuration commands. Peer Template Config (Config-rtr-tmplt)# Contains the BGP peer template configuration commands. MAC Access-list Config Switch (Config-mac-access-list)# Allows you to create a MAC Access-List and to enter the mode containing MAC Access-List configuration commands. TACACS Config Switch (Tacacs)# Contains commands to configure properties for the TACACS servers. Software Modules 19 CLI Command Reference Manual