Netgear M4300-28G CLI Manual Software Version 12.x - Page 134
snmp trap link-status, no snmptrap source-interface
View all Netgear M4300-28G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Parameter unit/slot/port loopback-id tunnel-id vlan-id Description The unit identifier that is assigned to the switch. The loopback interface that you want to use as the source IP address. The range of the loopback ID is from 0 to 7. The tunnel interface that you want to use as the source IP address. The range of the tunnel ID is from 0 to 7. The VLAN interface that you want to use as the source IP address. The range of the VLAN ID is from 1 to 4093. no snmptrap source-interface This command removes the global source interface for all SNMP communication between the SNMP client and the server. Format Mode no snmptrap source-interface Global Config snmp trap link-status This command enables link status traps for an interface or for all interfaces. Format Mode snmp trap link-status Interface Config no snmp trap link-status This command disables link status traps for an interface. Format Mode no snmp trap link-status Interface Config snmp trap link-status all This command enables link status traps for all interfaces. Format Mode snmp trap link-status all Global Config Management Commands 134 CLI Command Reference Manual