Netgear M4300-28G CLI Manual Software Version 12.x - Page 56
Current Out of Bandservice port IPv4 Address Configuration
View all Netgear M4300-28G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Routing Mode: Enable IPv6 address has been assigned manually. What do you want to do? C - Add IPv6 address. D - Assign IPv6 address for the switch using DHCP Mode. A - Assign IPv6 address for the switch using Auto Mode. N - Skip this option and go to the next question. Q - Quit. ? - Help. (C/D/A/N/Q/?)? c IPv6 Address: 2001:1::1 IPv6 Prefix-length: 64 IPv6 EUI64 flag (Y/N): n IPv6 Gateway: 2001:1::fffe Current Out of Band(service port) IPv4 Address Configuration IP Address Assignment Mode: DHCP IP Address: 172.26.2.104 Subnet Mask: 255.255.255.0 Default Router: 172.26.2.1 IPv4 address will be assigned automatically by the DHCP server in your network. You can disable DHCP mode and use static(fixed) IPv4 address. If fixed IPv4 Address Mode is selected, DHCP Protocol Mode will be disabled, and you will be prompted to set the values for the four fields above. Do you want to assign IPv4 address manually? (Y/N/Q/?) y IPv4 Address: 172.26.2.1 Network Mask: 255.255.255.0 Gateway: 172.26.2.254 Current Out of Band(Serviceport) IPv6 Address Configuration Service port IPv6 Address Mode: None IPv6 Administrative Mode: Enabled Service port IPv6 Address Mode autoconfigure: Disabled IPv6 Address: fe80::abd:43ff:fe71:73be/64 Service port IPv6 address gateway: EUI Flag: False IPv6 address has been assigned manually. What do you want to do? A - Assign IPv6 address for the switch using Auto Mode. D - Assign IPv6 address for the switch using DHCP Mode. Management Commands 56 CLI Command Reference Manual