Lantronix S3220 Series User Guide Rev J PDF 34.75 MB - Page 64
Terminating a USB Connection from HyperTerminal
![]() |
View all Lantronix S3220 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Transition Networks ION x222x / x32xx User Guide 9. Enter a go command to change the location for the command prompt. The go command format is: go [c=] [s=] [l1ap=] [l2ap=] (l1p=|l2p=|l3p=|l1d|l2d|l3d) (for a slide in card), or go [c=] [s=] [l1ap=] [l2ap=] (l1p=|l2p=|l3p=|l1d|l2d|l3d) (for a standalone card). 10. Enter commands to set up the various configurations for the NID. For configuration information, see "Section 4: Configuration" on page 87. For a description of all available CLI commands see the ION Systems CLI Reference Manual, 33461. Note: If required by your organization's security policies and procedures, use the CLI command set community write= to change the default password. See the ION Systems CLI Reference Manual, 33461. Terminating a USB Connection from HyperTerminal To terminate the USB connection, do the following. 1. At the command prompt, type q(uit). 2. Press Enter. 3. Click Call > Disconnect. 4. Click File > Exit. 33472 Rev. J https://www.transition.com Page 64 of 700
![](/manual_guide/products/lantronix-s3220-series-user-guide-rev-j-pdf-3475-mb-2c29388/64.png)